Kikbax TJ 2 Door Hinge Bushings

2 × 2 × 1 in
6 oz
Wrangler TJ

    Included in the set are:  4 Kikbax Hinge Bushings, Shipping Included

-Model/Fitment: Jeep Wrangler TJ/LJ 2 Door (1997-2006)

-Replace your factory door hinge bushings!

-Made of extremely durable Delrin (Acetal resin)

-Kikbax Hinge Bushings fit tightly and eliminate rust in your door hinges!

-Kikbax Hinge Bushings make the, “going doorless transition,” quick and easy!

-Your KikbaxTJ and your doors will go on and off smoother than ever!

Depending on the age and use of your Jeep Wrangler TJ, some hinges may be in better or worse condition than others. (In either case, it is never a bad time to replace the bushings.)  Many Jeeps that do not frequently take their doors off face stiff, corroded hinge bushings.  If you are looking for a cleaner, more durable hinge bushing, Kikbax Hinge Bushings are a fit.


Tools:  Hammer, mini socket extension, block of wood, sand paper (not included)

Step 1: (Remove Doors…)  Removal of the original door hinge bushings of your Jeep Wrangler 2 Door TJ.  Insert the mini socket extension into the bottom of the Jeep Wrangler TJ Hinge.  With a hammer, carefully tap the old door hinge bushings out.  (Be careful not to hit the paint while tapping)  Once the bushing starts coming out, some will remove by pulling.  If not, keep tapping it until the whole bushing is removed.    

Step 2:  Prepare the hinge.  Be sure there is no debris or remnants of the old bushings still in the hinge.  (Most hinges we have seen have a little corrosion and/or dust and dirt)  The cleaner the hinges the better the fitment.  

Step 3:  Insert the Kikbax Hinge Bushing into the Jeep Wrangler 2 Door TJ Hinge.  Push it in finger tight.  Using the block of wood between the bushing and hammer, tap the block of wood with the hammer until the Kikbax Hinge Bushing sits on top of the Jeep Wrangler TJ Hinge. 

Step 4: Repeat the process on the remaining 3 Jeep Wrangler TJ Hinges.